Photo by Lauren Fleischmann on Unsplash

Whether you need to hang bath towels in the bathroom or hand towels in the kitchen, a towel rack is an awesome thing to have around. And it is even better if made custom to suit your tastes and elevate the look of your home. For even more brownie points, you can make the towel rack yourself — and all it takes is some old picture frames and a little bit of elbow grease. Ready to start this fun project? Follow these seven easy steps.

1. Gather Your Tools & Materials

To create your custom towel rack, you will need:

7 Old picture frames in various sizes

1/2-inch screws

Drill

Screwdriver

Wood filler

Plastic wall anchors

Paint and brushes

220-grit sandpaper

Old newspaper

Hanger

2. Mock Up Your Design

Working on the ground, mock up the design for your picture frame towel rack. Start with the largest frame in the center, as that will be used to secure the completed towel rack to the wall. You should have the frames overlap enough that you can secure each one together using two screws.

3. Screw the Frames Together

After finalizing your custom design, use your drill to create pilot holes for your screws. Then, screw the frames together, one by one, being careful to avoid cracking the wood. Cover the tops of the screws with wood filler, creating a seamless surface.

4. Sand & Paint the Frames

With the frames assembled, sand down the exterior surfaces to scuff up the finish. This will help the paint stick to the surface. Then, put down newspaper and place your frames on top. Use your paintbrushes to apply a new coat of paint in your desired color. Allow the initial coat to dry for four hours, then repeat. Allow the second coat to fully dry overnight, though 24 hours is better.

5. Add a Hanger to the Back

Unless your central picture frame already has a hanger, you will need to add one to the back to create a solid mounting point. If your towel rack is a bit on the large side, consider using two mounting points to give it enough strength when the extra weight of the towels are added.

6. Mount the Rack on the Wall

Put the towel rack against the wall to find your preferred installation point. Remember to account for the length of the towels when they are folded over the bottom edges of the frames. Then, drill a hole, or two if you have dual hangers, in the wall, big enough for the plastic anchor.

Use the handle of your screwdriver to tap the plastic anchor into the holes you just made. Then, add a screw to each plastic anchor and secure them almost all the way down with your screwdriver. With those in place, you can then hang the towel rack from the screws in the wall.

7. Add Towels & Enjoy

After securing your towel rack to the wall, you just hang your towels to complete this project. You can then go about your business, secure in the knowledge that you always have a towel close at hand when you need one.

Tag: Bathroom Decor